Amocams 700 EIE

The Amocams 700 EIE supports the Hex Repeater protocol, an ASCII-like protocol. It does not use the special communications lockout mode of the "binary" Amocams 300 EIE. This EIE supports several custom data groups related to electronic gas measurement and supports RTU "chaining" via the repeater protocol for up to five RTUs.

Because of the large variety of Amocam configurations, this EIE requires communications data analysis at your site prior to implementation.

Specifications

The following table lists and describes EIE specifications.

Manufacturer	Amoco
Protocol(s)	Hex Repeater
Model(s)	Amocams 3340 Amocams 700 Amocams 700EGMP2 Amocams 700EGMWC
Required Files	CxDdsAmo700Editors.dll UisAmo700Driver.dll or UisAmo700Driver64.dll
Sample Templates	Amo700_Amo3340_GmrCustomExample.dtf
eieType eieType identifies the CygNet EIE type associated with a template (in the deviceDefinition element); it links a device driver with a template. It typically refers to the name of the protocol according to which an EIE conforms. A value includes a CygNet-defined string, up to 20 characters, alphabetical characters only, and no spaces. The default value is supplied in the template and is not typically changed.	Amo700
Cryout Support	No
FMS Support	Yes, using FMS Legacy EFM data items. Note: In cases where only GMR support was previously available, CygNet Measurement now provides equivalent data support using FMS Legacy data items. If you were previously using GMR data items, you must update to use FMS Legacy data items, effective with the CygNet v8.5.0 release. Update options are provided as part of your corresponding software upgrade procedure.
Listen Mode	No
64-bit Support	Yes. See 64-bit Device Drivers.

For more information, see sample device template files and manufacturer documentation.

---

More:

Device Page Properties

Data Groups

UIS Command Component Parameters

Opcode and Data Group Mapping

Generic Template-Driven Data Groups

Composite Data Group

Log Retrieval Optimization